Hydr8 Liquicure™ Soil Surfactant/Wetting Agent
Hydr8 Liquicure™ improves the infiltration and penetration of applied irrigation water in agricultural crops, ornamental plants and managed turf. It is formulated to minimize repellency of hydrophobic soils, enhance adhesive tension, and relieve cohesive tension in water. Applications can be made via commercial tank sprayers, ride-on spreader/sprayers, hose end and pump sprayers, and most irrigation systems.
PROFESSIONAL APPLICATION RECOMMENDATIONS
Pro Directions For Use
Applications with less than the recommended dilution should be watered in for 10 minutes.
Turf: Apply at a rate of 1.5 to 3 ounces per 1,000 sq. ft. with a minimum of 1 gallon of water per 1,000 sq. ft. per ounce applied. Mix with water at a minimum 7:1 dilution. Apply directly to foliage.
Ornamental/Bedding Plants: Apply at a rate of 1 to 2 ounces per 1,000 sq. ft. with a minimum of 1 gallon of water per 1,000 sq. ft. per ounce applied.
Planting: Apply as a soil drench at a rate of 1 pint per 250 gallons of water.
ACTIVE INGREDIENTS
ACTIVE INGREDIENTS
Copolymers of polyethylene &
polypropylene glycols …………….. 25.0%
Inert Ingredients ……………………. 75.0%
Exempt from a tolerance as specified in 40 CFR 180.
Information regarding the contents and levels of metals in this product is available on the internet at http://aapfco.org/metals.html
PALLET ORDERS (Mix/Match)
Pallet Orders can be any combination of products.
5 gallon buckets
• 1 pallet equals 36 buckets • 180 gallons
2.5 gallon jugs
• 1 case equals 2 jugs
• 1 pallet equals 36 cases •180 gallons
PRO PACKAGING
250 gallon IBC Totes
5-gal bucket
2.5-gallon jug
PRODUCT RESOURCES
Storage: Store in a cool dry place away from direct sunlight. Product will store for 2 years under warehouse conditions.
Always read and follow label directions.
